Stopping Engine; Procedure - Yamaha F75 Owner's Manual
Hide thumbs
Also See for F75:
- Owner's manual (234 pages) ,
- Installation manual (224 pages) ,
- Maintenance manual (36 pages)
Table of Contents
Advertisement
1. "
" switch
2. "
" switch
To increase the trolling speed, press the "
switch.
To decrease the trolling speed, press the "
switch.
TIP:
The trolling speed changes approximately
G
50 r/min each time a switch is pressed.
If the trolling speed has been adjusted, the
G
engine returns to the normal trolling speed
when the engine is stopped and restarted
or when the engine speed exceeds approx-
imately 3000 r/min.
EMU27821
Stopping engine
Before stopping the engine, first let it cool off
for a few minutes at idle or low speed. Stop-
ping the engine immediately after operating at
high speed is not recommended.
EMU27845
Procedure
1.
Push and hold the engine stop button or
turn the main switch to "
"
"
2.
" (off).
3.
4.
After stopping the engine, disconnect the
fuel line if there is a fuel joint on the out-
board motor.
Tighten the air vent screw on the fuel tank
cap (if equipped).
Remove the key if the boat will be left un-
attended.
Operation
57
- Quick Links:
- Table of Contents
Hide quick links:
Advertisement
Table of Contents
