Supported Sfp/Sfp+ Transceivers - Cisco Firepower 2100 Series Hardware Installation Manual

Hide thumbs Also See for Firepower 2100 Series:

Table of Contents

Overview

Although the hardware supports hot swapping for the SSDs, the software does not, so you must power down

the chassis before removing and replacing them.

For More Information

• See

Supported SFP/SFP+ Transceivers

The SFP/SFP+ transceiver is a bidirectional device with a transmitter and receiver in the same physical

package. It is a hot-swappable optical or electrical (copper) interface that plugs into the SFP/SFP+ ports on

the fixed ports and the network module ports, and provides Ethernet connectivity.

Figure 20: SFP Transceiver

Safety Warnings

Warning

Front Panel LEDs, on page 12

Remove and Replace the SSD, on page 65

Dust plug

Receive optical bore

Take note of the following optical connection warnings:

Statement 1051 Laser Radiation

Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into beams

or view directly with optical instruments.

for the location and description of the SSD LEDs on the front panel.

for the procedure for removing and replacing the SSD.

Bail clasp

Transmit optical bore

Cisco Firepower 2100 Series Hardware Installation Guide

Supported SFP/SFP+ Transceivers

Table of Contents