Advertisement
Quick Links
MS410 Series Installation Guide
Models
Model number
MS410-16
MS410-32
Package contents
In addition to the MS switch, the following are provided (mounting kit provided with 1U models only):
Rack Mount Kit includes:
• US 12-24 mounting screws and cage nuts, 5 of each
• INTL M5 mounting screws and cage nuts, 5 of each
• INTL M6 mounting screws and cage nuts, 5 of each
• Mounting washers
Description
Layer-3 16-port 1Gbe SFP and 2-port
10Gbe SFP+ aggregation switch with 1
management interface and hot-swappable power
supplies / fans
Layer-3 32-port 1Gbe SFP and 4-port 10Gbe
SFP+ aggregation switch with 1 management
interface and hot-swappable power supplies / fans
1
Advertisement
Related Manuals for Cisco MS410-16
Summary of Contents for Cisco MS410-16
-
Page 1: Package Contents
MS410 Series Installation Guide Models Model number Description Layer-3 16-port 1Gbe SFP and 2-port 10Gbe SFP+ aggregation switch with 1 MS410-16 management interface and hot-swappable power supplies / fans Layer-3 32-port 1Gbe SFP and 4-port 10Gbe MS410-32 SFP+ aggregation switch with 1 management... - Page 2 MS410-16 Series front panel MS410-32 Series front panel The MS comes standard with US power cord. EU/ Power input UK/AU power cords may be ordered separately. MS410 Series Back Panel Ports and Status Indicators The MS uses LEDs to inform the user of the device's status. When the device powers on, the main LED will be amber.
- Page 3 Switch is unable to or Status Orange has not yet connected to the Meraki cloud Firmware upgrade in Flashing green process Switch is fully operational and White connected to the Meraki cloud Switch is booting, Alternating searching for uplink to Meraki Cloud Switch does not have power...
- Page 4 The MS410 series will ship with all fans and a single power supply included. Any additional parts, including fans and power supplies, can be purchased separately. Equipment is to be used only in a restricted access location and installed/operated only by trained service personnel. Bringing your Stack Online When connecting up your MS410 stack the recommended cabling method is to connect one uplink and then connect the stacking cables from stack port 1 to stack port 2 of the next switch.