All Replacement Parts; Gaskets, Oil Seals, And O-Rings; Bearings And Oil Seals - Yamaha MX360 Service Manual

Hide thumbs Also See for MX360:

Table of Contents

IMPORTANT INFORMATION

ALL REPLACEMENT PARTS

We recommend the use of genuine Yamaha parts for all replace-

ments. Use oil and/or grease, recommended by Yamaha, for

assembly and adjustment.

1. All gaskets, seals, and O-rings should be replaced when an

engine is overhauled. All gaskets surfaces, oil seal lips, and

O-rings must be cleaned.

2. Properly oil all mating parts and bearings during reassembly.

Apply grease to the oil seal lips.

Install the bearing(s) 1 and oil seal(s) 2 with their manufacture's

marks or numbers facing outward. (In other words, the stamped

letters must be on the side exposed to view.) When installing oil

seal(s), apply a light coating of lightweight lithium base grease to

SVU1110

the seal lip(s). Oil the bearings liberally when installing.

NOTICE

Do not use compressed air to spin the bearings dry. This

causes damage to the bearing surfaces.

SVU1120

1-2

GEN

INFO

Table of Contents