Replacing The Engine Oil - Yamaha MX360 Service Manual
Hide thumbs
Also See for MX360:
- Supplementary service manual (32 pages) ,
- Service manual (178 pages) ,
- Owner's manual (140 pages)
Table of Contents
Advertisement
1
3
2
A YAMALUBE 4 (10W-40)
D SAE 10W
C SAE #20
PERIODIC MAINTENANCE
B SAE #30
2-6
REPLACING THE ENGINE OIL
1. Warm up the engine for several minutes,
and then stop the engine.
2. Remove:
9 Oil filler cap 1
9 Oil drain bolt 2
9 Oil drain bolt gasket 3
TIP
9 This engine is equipped with two oil filler
caps. Use whichever side is accessible.
9 This engine is equipped with two oil drain
bolts. Use whichever side is accessible.
3. Drain:
9 Engine oil
Place the oil pan under the engine and
drain the engine oil.
4. Install:
9 Oil drain bolt gasket 3
9 Oil drain bolt 2
Oil drain bolt:
Refer to "TIGHTENING TORQUES"
in the Supplementary service
manual.
5. Fill:
9 Engine oil
Make sure to fill with the recommended
engine oil from the oil filler hole in the
crankcase.
Recommended engine oil:
Refer to "SPECIFICATIONS" in
the Supplementary service
manual.
Recommended engine oil grade:
Refer to "SPECIFICATIONS" in
the Supplementary service
manual.
Engine oil quantity:
Refer to "SPECIFICATIONS" in
the Supplementary service
manual.
6. Check:
9 Engine oil level
(Refer to "ENGINE OIL LEVEL" on 2-5)
CHK
ADJ
Advertisement
Table of Contents
