Checking The Recoil Starter; Assembling The Recoil Starter - Yamaha MX360 Service Manual
Hide thumbs
Also See for MX360:
- Supplementary service manual (32 pages) ,
- Service manual (178 pages) ,
- Owner's manual (140 pages)
Table of Contents
Advertisement
3
1
1
3
a
1
4
2
1
3
2
a
b
2
RECOIL STARTER
CHECKING THE RECOIL STARTER
1. Check:
9 Starter rope
Wear/damage → Replace.
9 Starter case
Cracks/damage → Replace.
9 Starter spring
Dirt → Clean and apply grease.
Wear/damage → Replace.
2. Check:
9 Drive pawls 1
9 Drive plate 2
Wear/damage → Replace.
9 Springs 3
9 Compression spring 4
Cracks/damage → Replace.
ASSEMBLING THE RECOIL STARTER
1. Install:
9 Starter rope 1
9 Starter spring 2
9 Sheave drum 3
TIP
Engage the spring hook a with the drum slit,
then wind the spring counterclockwise into the
drum from the larger to the smaller diameter.
2. Install:
9 Sheave drum assembly
TIP
Engage the spring hook a with the starter
case hook b.
3. Install:
9 Springs 1
9 Drive pawls 2
TIP
Set the ends of the springs 1 outside the
drive pawls 2.
3-10
ENG
Advertisement
Table of Contents
