Download Print this page

Disassembling The Recoil Starter - Yamaha MX360 Service Manual

Hide thumbs Also See for MX360:

Table of Contents

RECOIL STARTER

DISASSEMBLING THE RECOIL STARTER

1. Remove:

9 Starter handle 1

TIP

Before untying the knot a above the starter

handle, make a knot b on the rope so that

the rope is not pulled into the case.

2. Remove:

9 Drive plate screw 1

9 Drive plate/Clip

9 Drive pawls

9 Springs

TIP

Release the spring preload before removing

the drive plate screw 1. Hook the rope into

the sheave drum slot a and turn the sheave

drum assembly clockwise.

3. Remove:

9 Sheave drum assembly 1

9 Starter spring 2

9 Starter rope

NOTICE

Be sure to press down on the sheave drum

assembly, because the spring will spread

out suddenly when it is removed from the

starter case.

3-9

ENG

Table of Contents