Enabling Eap-Fast - Cisco Aironet CB21AG Installation And Configuration Manual
Cisco aironet 802.11a/b/g wireless lan client adapters
Hide thumbs
Also See for Aironet CB21AG:
- Installation and configuration manual (286 pages) ,
- Install wizard (34 pages) ,
- User manual (22 pages)
Table of Contents
Advertisement
Setting Security Parameters
Enabling EAP-FAST
Before you can enable EAP-FAST authentication, your network devices must meet the following
requirements:
•
•
Follow these steps to enable EAP-FAST authentication for this profile.
Perform one of the following on the Profile Management (Security) window:
Step 1
•
•
Note
Note
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
5-34
Access points to which your client adapter may attempt to authenticate must use the following
firmware versions or later: 11.23T (340 and 350 series access points), 11.54T (1200 series access
points), Cisco IOS Release 12.3(4)JA (1130 series and BR 1310 series access points), Cisco IOS
Release 12.3(7)JA (1240 series access points), or Cisco IOS Release 12.2(4)JA (1100 series access
points).
To use WPA or CCKM, access points must use Cisco IOS Release 12.2(11)JA or later. To
Note
use WPA2, access points must use Cisco IOS Release 12.3(2)JA or later. To use the
Reporting Access Points That Fail LEAP or EAP-FAST Authentication feature, access
points must use the firmware versions listed on
Note
The access point to which your client adapter will associate must be configured for open
authentication.
All necessary infrastructure devices (such as access points, servers, gateways and user databases)
must be properly configured for EAP-FAST authentication.
If you want to enable EAP-FAST without WPA or WPA2, choose 802.1x under Set Security Options
and EAP-FAST in the 802.1x EAP Type drop-down box.
If you want to enable EAP-FAST with WPA or WPA2, choose WPA/WPA2/CCKM under Set
Security Options and EAP-FAST in the WPA/WPA2/CCKM EAP Type drop-down box.
If you want to enable CCKM on the client adapter, you must choose the WPA/WPA2/CCKM
security option, regardless of whether you want the adapter to use WPA or WPA2. The
configuration of the access point to which your client adapter associates determines whether
CCKM will be used with 802.1x, WPA, or WPA2.
Refer to the
"WPA and WPA2" on page 5-19
Chapter 5
Configuring the Client Adapter
page
5-20.
for additional information.
OL-4211-05
Advertisement
Table of Contents
