Enabling Eap-Tls - Cisco Aironet Installation And Configuration Manual
Wireless lan client adapters for windows
Hide thumbs
Also See for Aironet:
- Installation and configuration manual (92 pages) ,
- Quick start manual (12 pages) ,
- Getting started manual (38 pages)
Table of Contents
Advertisement
Setting Network Security Parameters
Figure 5-7
Step 7
Select the Enable network access control using IEEE 802.1X check box.
Step 8
Perform one of the following, depending on the authentication type you want to use:
•
•
•
•
Enabling EAP-TLS
Follow the steps below to enable EAP-TLS.
For EAP type, select Smart Card or other Certificate.
Step 1
Click Properties. The Smart Card or other Certificate Properties screen appears (see
Step 2
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
5-36
Wireless Network Connection Properties Screen (Authentication Tab)
If you are planning to use EAP-TLS, go to the
If you are planning to use EAP-MD5, go to the
If you are planning to use PEAP, go to the
If you are planning to use EAP-SIM, go to the
Chapter 5
"Enabling EAP-TLS"
"Enabling EAP-MD5" section on page
"Enabling PEAP" section on page
"Enabling EAP-SIM" section on page
Configuring the Client Adapter
section below.
5-37.
5-38.
5-40.
Figure
5-8).
OL-1394-04
Advertisement
Table of Contents
Troubleshooting
