After Your Eap-Fast Password Expires - Cisco Aironet CB21AG Installation And Configuration Manual
Cisco aironet 802.11a/b/g wireless lan client adapters
Hide thumbs
Also See for Aironet CB21AG:
- Installation and configuration manual (286 pages) ,
- Install wizard (34 pages) ,
- User manual (22 pages)
Table of Contents
Advertisement
Using LEAP or EAP-FAST with a Manually Prompted Login
If your profile is configured for EAP-FAST and a message appears asking if you want to auto-provision
Step 4
a PAC, click Yes.
If your client adapter authenticates, the window shows that each stage was successful and then
Step 5
disappears. ASTU and the Link Status field on the ADU Current Status window show Authenticated.
If the authentication attempt fails, an error message appears after the authentication timeout period has
expired. Refer to the
After Your EAP-FAST Password Expires
If the EAP-FAST password for your current profile expires or becomes invalid, follow these steps to
change your password.
When the Please Change Password window appears (see
Step 1
invalid, enter your old password in the Old Password field.
Figure 6-10 Please Change Password Window
Enter your new password in both the New Password and Verify New Password fields.
Step 2
Click OK. The client adapter should authenticate using your new password.
Step 3
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
6-12
"Error Messages" section on page 10-12
Chapter 6
Using EAP Authentication
for the necessary action to take.
Figure
6-10) to indicate that your password is
OL-4211-05
Advertisement
Table of Contents
