After A Reboot Or Logon - Cisco Aironet CB21AG Installation And Configuration Manual
Cisco aironet 802.11a/b/g wireless lan client adapters
Hide thumbs
Also See for Aironet CB21AG:
- Installation and configuration manual (286 pages) ,
- Install wizard (34 pages) ,
- User manual (22 pages)
Table of Contents
Advertisement
Chapter 6
Using EAP Authentication
After a Reboot or Logon
After your computer reboots or you log on, follow these steps to authenticate using LEAP or EAP-FAST.
When the Windows login window appears, enter your Windows username and password and click OK.
Step 1
Step 2
When the Enter Wireless Network Password window appears (see
EAP-FAST username and password and click OK. The domain name can be entered in the Log On To
field; it is optional.
Figure 6-4
The LEAP or EAP-FAST Authentication Status window appears.
If your profile is configured for EAP-FAST and a message appears asking if you want to auto-provision
Step 3
a PAC, click Yes.
If your client adapter authenticates, the window shows that each stage was successful and then
Step 4
disappears. The logon or boot-up process completes.
If the authentication attempt fails, an error message appears after the authentication timeout period has
expired. Refer to the
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
OL-4211-05
Enter Wireless Network Password Window
"Error Messages" section on page 10-12
Using LEAP or EAP-FAST with an Automatically Prompted Login
Figure
6-4), enter your LEAP or
for the necessary action to take.
6-7
Advertisement
Table of Contents
