After Your Eap-Fast Password Expires; Using Eap-Tls - Cisco Aironet CB21AG Installation And Configuration Manual
Cisco aironet 802.11a/b/g wireless lan client adapters
Hide thumbs
Also See for Aironet CB21AG:
- Installation and configuration manual (286 pages) ,
- Install wizard (34 pages) ,
- User manual (22 pages)
Table of Contents
Advertisement
Using EAP-TLS
After Your EAP-FAST Password Expires
If the EAP-FAST password for your current profile expires or becomes invalid, follow these steps to
change your password.
When the Please Change Password window appears (see
Step 1
invalid, enter your old password in the Old Password field.
Figure 6-11 Please Change Password Window
Enter your new password in both the New Password and Verify New Password fields.
Step 2
Click OK. The client adapter should authenticate using your new password.
Step 3
Edit the profile in ADU by changing the saved username and password on the EAP-FAST Settings
Step 4
window.
Using EAP-TLS
After you (or auto profile selection) activate a profile that uses EAP-TLS authentication or you eject and
reinsert the client adapter, reboot the computer, or log on while this profile is active, the EAP
authentication process begins automatically, and the client adapter should EAP authenticate.
If your client adapter authenticates, ASTU and the Link Status field on the ADU Current Status window
show Authenticated. If the authentication attempt fails, ASTU and ADU show Authentication Failed.
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
6-14
Chapter 6
Using EAP Authentication
Figure
6-11) to indicate that your password is
OL-4211-05
Advertisement
Table of Contents
