Table of Contents
Advertisement
Controlling the rest of your system
Chapter 11:
Controlling the rest of your system
Setting the remote to control other
components
Most components can be assigned to one of the input
source buttons (such as DVD/LD or CD) using the
component's manufacturer preset code stored in the
remote.
However, there are cases where only certain functions
may be controllable after assigning the proper preset
code, or the codes for the manufacturer in the remote
control will not work for the model that you are using.
If you can't find a preset code that matches the
component you want to control, you can still teach the
remote individual commands from another remote
control (see Programming signals from other remote
controls below).
Note
• You can cancel or exit any of the steps by pressing
RECEIVER. To go back a step, press RETURN.
• After one minute of inactivity, the remote
automatically exits the operation.
Selecting preset codes directly
SYSTEM OFF
INPUT
RECEIVER
SOURCE
SELECT
CD
TV
VIDEO 2
DVD
SAT
VIDEO 1
TV CONT
DVR2
CD-R
MULTI IN
ROOM2/3
DVR1
i Pod
TUNER
RECEIVER
1
While pressing the RECEIVER button, press SETUP .
The remote LCD display shows SETUP.
2
Use
to select PRESET then press ENTER .
3
Press the input source button for the component
you want to control then press ENTER .
The LCD on the remote displays the component you want
to control (for example DVD or VIDEO 1).
Note
1 You can't assign the RECEIVER, TUNER or iPod buttons.
2 • When using a Pioneer HDD recorder, please select PIONEER DVR 487, 488, 489 or 493.
• When using a Pioneer plasma display released prior to summer 2005, please select preset codes 600 or 231.
3 The remote can store about 200 preset codes (this has been tested with codes of Pioneer format only).
4 • You can't assign the RECEIVER, TUNER or iPod buttons.
• TV CONTROL buttons (TV ,TV VOL +/–, TV CH +/– and INPUT SELECT) can only be learned after selecting TV CONT.
D.ACCESS
CLASS
+10
DISC
ENTER
AV PARAMETER
CH LEVEL
TOP MENU ì
MENU
TUNE
ST
ST
T.EDIT
ENTER
SETUP
SETUP
RETURN
TUNE
PTY SEARCH
BAND
GUIDE
TV CONTROL
INPUT
VOL
TV VOL
TV CH
SELECT
1
4
Use
to select the first letter of the brand name
of your component then press ENTER .
This should be the manufacturer's name (for example, P
for Pioneer).
5
Use
to select the manufacturer's name from
the list then press ENTER .
6
Use
to select the proper code from the list,
then try using this remote with your component.
The code should start with the component type (for
example, DVD 020). If there is more than one, start with
2
the first one.
To try out the remote control, switch the component on or
off (into standby) by pressing SOURCE
seem to work, select the next code from the list (if there
is one).
• If you can't find or properly enter a preset code, you
can still teach the remote individual commands from
another remote control (see Programming signals
from other remote controls below).
7
If your component is controlled successfully, press
ENTER to confirm.
The remote LCD display shows OK.
Programming signals from other
remote controls
If the preset code for your component is not available, or
the available preset codes do not operate correctly, you
can program signals from the remote control of another
component. This can also be used to program additional
operations (buttons not covered in the presets) after
3
assigning a preset code.
1
While pressing the RECEIVER button, press SETUP .
The remote LCD display shows SETUP.
2
Use
to select LEARNING then press ENTER .
The LCD on the remote prompts you for the component
you want to control (for example DVD or VIDEO 1).
3
Press the input source button for the component
you want to control then press ENTER .
PRES KEY shows in the LCD display.
11
. If it doesn't
4
67
En
- Quick Links:
- Connecting Using Hdmi
- Specifications
Hide quick links:
Advertisement
Table of Contents
