Table of Contents
Advertisement
Listening to your system
• PCM – Only PCM signals are output.
selects the first available signal in the following
order:
; HDMI; DIGITAL.
When set to DIGITAL or AUTO, 2 DIGITAL lights with
Dolby Digital decoding, DTS lights with DTS decoding,
and WMA9 Pro lights to indicate decoding of a WMA9
Pro signal.
Using surround back channel processing
• Default setting: SBch ON
You can have the receiver automatically use 6.1 or 7.1
decoding for 6.1 encoded sources (for example, Dolby
Digital EX or DTS-ES), or you can choose to always use
6.1 or 7.1 decoding (for example, with 5.1 encoded
material). With 5.1 encoded sources, a surround back
channel will be generated, but the material may sound
better in the 5.1 format for which it was originally
encoded (in which case, you can simply switch surround
back channel processing off).
The table below indicates when you will hear the
surround back channel when playing various kinds of
ì
sources. (
=Sound plays through surround back
speaker(s))
STATUS
SIGNAL SEL
MULTI OPE
THX
SHIFT
PHASE
•
Press SBch (SBch PROCESSING) repeatedly to cycle
the surround back channel options.
Each press cycles through the options as follows:
Type of source
Dolby Digital EX/DTS-ES encoded
multichannel sources with 6.1ch surround
Dolby Digital/DTS/WMA9 Pro encoded, DVD-
Audio and SACD multichannel sources
Dolby Digital/DTS/PCM/WMA9 Pro encoded,
DVD-Audio and SACD stereo sources
Analog 2-channel (stereo) sources
a. Only applicable when using the Virtual Surround Back mode.
b. Not applicable when using the Virtual Surround Back mode.
Note
1 • This is useful if you find there is a slight delay before AUTO recognizes the PCM signal on a CD, for instance.
• When PCM is selected, noise may be output during playback of non-PCM sources. Please select another input signal if this is a problem.
2 • You can't use the Virtual Surround Back mode with headphones, or with the THX, STEREO or Stream Direct modes.
• You can only use the Virtual Surround Back mode if the surround speakers are on and the Surr Back setting is set to NO in the Speaker Setting on
page 42.
• The Virtual Surround Back mode cannot be applied to sources that do not have surround channel information.
1
The receiver
SBch
STEREO
STANDARD
ADV. SURR
MCACC
S.DIRECT
SBch
Processing /
Multichannel
Virtual SB
sources
mode
ì
ON
ì
AUTO
ì
ON
AUTO
ON
AUTO
ON
AUTO
• SBch ON – 6.1 or 7.1 decoding is always used (for
example, a surround back channel will be generated
for 5.1 encoded material)
• SBch AUTO – Automatically switches to 6.1 or 7.1
decoding for 6.1 encoded sources (for example,
Dolby Digital EX or DTS-ES)
• SBch OFF – Maximum 5.1 playback
Using the Virtual Surround Back mode
When you're not using surround back speakers,
selecting this mode allows you to hear a virtual surround
back channel through your surround speakers. You can
choose to listen to sources with no surround back
channel information, or if the material sounds better in
the format (for example, 5.1) for which it was originally
encoded, you can have the receiver only apply this effect
to 6.1 encoded sources like Dolby Digital EX or DTS-ES.
The table indicates when you will hear the virtual
ì
surround back channel. (
channel is active)
•
Press SBch (SBch PROCESSING) repeatedly to cycle
the virtual surround back channel options.
Each press cycles through the options as follows:
• VirtualSB ON – Virtual Surround Back is always used
(for example, on 5.1 encoded material)
• VirtualSB AUTO – Virtual Surround Back is
automatically applied to 6.1 encoded sources (for
example, Dolby Digital EX or DTS-ES)
• VirtualSB OFF – Virtual Surround Back mode is
switched off
Standard / THX
Stereo sources
2 Pro Logic II x
2 Pro Logic
ì
a
ì
b
ì
ì
ì
a
b
ì
=Virtual surround back
Advanced
surround
Neo:6
ì
ì
ì
ì
ì
ì
ì
b
ì
ì
ì
ì
ì
05
2
29
En
- Quick Links:
- Connecting Using Hdmi
- Specifications
Hide quick links:
Advertisement
Table of Contents
