Table of Contents
Advertisement
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
GETTING READY
Raise the presser foot lever.
c
a Presser foot lever
The presser foot is raised.
d
With a screwdriver, loosen the presser foot
holder screw, and then remove the walking
foot.
a Presser foot holder screw
Attach the presser foot holder.
e
• For details, refer to "Removing the presser
foot holder" (page 40).
Memo
Only the straight stitch (with reinforcement
stitching) and the zigzag stitch can be used
with the walking foot. For details on the
stitches, refer to "Stitch Settings" (page 98).
42
Removing the flat bed attachment makes it easier to
sew cylindrical pieces such as cuffs and pant legs.
a
a
b
a
c
Stitching cylindrical pieces
Pull the flat bed attachment off to the left.
With the flat bed attachment removed, free-
arm sewing is possible.
Slide the part that you wish to sew onto the
arm, and then sew from the top.
When you are finished with free-arm sewing,
install the flat bed attachment back in its
original position.
Advertisement
Table of Contents
