Table of Contents
Advertisement
—— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Operation beep
Each time a key is pressed or an incorrect operation is
performed, a beep is sounded.
■ For a correct operation
One beep is sounded.
■ If an incorrect operation is performed
Two or four beeps are sounded.
■ If the machine locks up, for example, because
the thread is tangled
The sewing machine continues to beep for four
seconds. The machine automatically stops.
Be sure to check for the cause of the error, and
correct it before continuing to sew.
Cancelling the operation beep
When the sewing machine is purchased, it is set to
beep each time an operation panel key is pressed.
This setting can be changed so that the machine does
not beep.
a
Turn on the sewing machine.
The LCD comes on.
b
While holding down stitch selection key
turn on the sewing machine.
The following screen appears.
Press a stitch length key to select "OFF".
c
* To turn on the operation beep, press a stitch
length key again to select "ON".
:
d
Turn off the sewing machine.
The next time that the sewing machine is
turned on, the machine is set so that it will not
beep.
Attaching the top cover
If the top cover of the sewing machine was removed,
re-attach it as described in the following procedure.
a
Hold the top cover level.
b
Push the top cover down to attach it to the
machine.
,
Troubleshooting 117
4
Advertisement
Table of Contents
