hit counter script

Network Requirements; Cisco Callmanager Configuration - Cisco 7960 Administration Manual

Ip phone administration guide for cisco callmanager 3.2
Hide thumbs Also See for 7960:
Table of Contents

Advertisement

Before You Begin

Network Requirements

Cisco CallManager Configuration

Cisco IP Phone Administration Guide for Cisco CallManager 3.2, Cisco IP Phones 7960/7940/7910
3-2
Before installing the Cisco IP Phone, review the requirements in these sections:
Network Requirements, page 3-2
Cisco CallManager Configuration, page 3-2
Safety, page 3-3
For the Cisco IP Phone to successfully operate as a Cisco IP Phone endpoint in
your network, your network must meet the following requirements:
Working VoIP Network
Voice over IP (VoIP) configured on your Cisco routers and gateways
Cisco CallManager Release 3.0 or higher installed in your network and
configured to handle call processing
IP network that supports DHCP or manual assignment of IP address, gateway,
and subnet mask
The Cisco IP Phone requires Cisco CallManager to handle call processing. Refer
to the Cisco CallManager Administration Guide or context-sensitive help in the
Cisco CallManager application to ensure that Cisco CallManager is set up
properly to manage the phone and to properly route and process calls.
If you plan to use auto-registration, verify that it is enabled and properly
configured in Cisco CallManager before connecting any Cisco IP Phone to the
network. See the
"Using Auto-Registration" section on page 2-11
In Cisco CallManager, you can add users to the database and associate them with
specific phones. By doing this, users gain access to web pages that allow them to
configure phone options such as call forwarding, speed dialing, and voice mail.
See the
"Adding Users to Cisco CallManager" section on page 6-5
Chapter 3
Installing the Cisco IP Phone
for details.
for details.
78-10453-04

Advertisement

Table of Contents
loading

This manual is also suitable for:

7910Cisco 7940

Table of Contents