Cisco 6921 Setup Manual
Hide thumbs
Also See for 6921:
- Administration manual (210 pages) ,
- User manual (124 pages) ,
- Features (29 pages)
Table of Contents
Advertisement
Setting Up the Cisco Unified IP Phone
This chapter includes the following topics, which help you install the Cisco Unified IP Phone on an IP
telephony network:
•
•
•
•
•
•
•
•
Before you install a Cisco Unified IP phone, you must decide how to configure the phone in your
Note
network. Then you can install the phone and verify its functionality. For more information, see
Chapter 2, "Preparing to Install the Cisco Unified IP Phone on Your Network."
Before You Begin
Before installing the Cisco Unified IP Phone, review the requirements in these sections:
•
•
Network Requirements
For the Cisco Unified IP Phone to successfully operate as a Cisco Unified IP Phone endpoint in your
network, your network must meet the following requirements:
•
•
Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
OL-24567-01
Before You Begin, page 3-1
Installing the Cisco Unified IP Phone, page 3-5
Reducing Power Consumption on the Phone, page 3-9
Footstand, page 3-9
Verifying the Phone Startup Process, page 3-14
Configuring Startup Network Settings, page 3-15
Network Requirements, page 3-1
Cisco Unified Communications Manager Configuration, page 3-2
Working VoIP network:
VoIP configured on your Cisco routers and gateways
-
Cisco UnifiedCM installed in your network and configured to handle call processing
-
IP network that supports DHCP or manual assignment of IP address, gateway, and subnet mask
3
C H A P T E R
3-1
Advertisement
Table of Contents
Related Manuals for Cisco 6921
Summary of Contents for Cisco 6921
-
Page 1: Table Of Contents
Cisco UnifiedCM installed in your network and configured to handle call processing – IP network that supports DHCP or manual assignment of IP address, gateway, and subnet mask • Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP) OL-24567-01... -
Page 2: Understanding The Cisco Unified Ip Phone 6921, 6941, 6945, And 6961 Components
The back of the Cisco Unified IP Phone 6921, 6941, 6945, and 6961 includes these ports: Network port—Labeled network • Access port—Labeled computer • Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP) OL-24567-01... - Page 3 The Cisco Unified IP Phone 6945 supports wideband headsets. Note Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP) OL-24567-01...
- Page 4 Connecting a Headset To connect a wired headset to the Cisco Unified IP Phone, plug it into the Headset port on the back of the phone. Press the Headset button on the phone to place and answer calls using the headset.
-
Page 5: Installing The Cisco Unified Ip Phone
You can use either Category 3/5/5e cabling for 10-Mbps connections, but you must use Category 5/5e for 100 Mbps connections. Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP) OL-24567-01... - Page 6 Chapter Installing the Cisco Unified IP Phone Figure 3-1 Cisco Unified IP Phone 6921 and 6941 Cable Connections Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP) OL-24567-01...
- Page 7 Handset connection AC power wall plus (optional) Analog headset connection (optional) Network port (10/100 SW) connection. IEEE 802.3af power enabled Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP) OL-24567-01...
- Page 8 Footstand, page 3-9 • Verifying the Phone Startup Process, page 3-14 • Configuring Startup Network Settings, page 3-15 • Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP) OL-24567-01...
-
Page 9: Reducing Power Consumption On The Phone
Cisco Unified IP Phone 6961. Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP) OL-24567-01... - Page 10 Cisco Unified IP Phone 6921 and 6941 Footstand slots for a higher viewing angle Footstand slots for a lower viewing angle Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP) 3-10 OL-24567-01...
- Page 11 Cisco Unified IP Phone 6945 Footstand slots for a higher viewing angle Footstand slots for a lower viewing angle Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP) 3-11 OL-24567-01...
- Page 12 Cisco Unified IP Phone 6961 Footstand slots for a higher viewing angle Footstand slots for a lower viewing angle Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP) 3-12 OL-24567-01...
-
Page 13: Higher Viewing Angle
Chapter Footstand Higher Viewing Angle Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP) 3-13 OL-24567-01... -
Page 14: Lower Viewing Angle
The following LED buttons flash on and off during the various stages of boot up as the phone checks its hardware. See Table 3-2 for a list of the hardware test and the LED diagnostic status. Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP) 3-14 OL-24567-01... -
Page 15: Configuring Startup Network Settings
“Understanding Security Features for Cisco Unified IP Phones” section on page 1-14. Also, refer to Cisco Unified Communications Manager Security Guide. Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP) 3-15 OL-24567-01... - Page 16 Information and ensuring that the LSC setting shows Installed. Related Topic Understanding Security Features for Cisco Unified IP Phones, page 1-14 Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP) 3-16 OL-24567-01...