Table 1
Revision
OL-17500-03
OL-17500-02
OL-17500-01
Audience
The Cisco ASR 9000 Series Aggregation Services Router Cisco ASR 9000 Series Aggregation Services
Router Ethernet Line Card Installation Guide is written for hardware installers and system
administrators of Cisco routers.
This publication assumes that the user has a substantial background in installing and configuring router
and switch-based hardware. The reader should also be familiar with electronic circuitry and wiring
practices, and have experience as an electronic or electromechanical technician.
Purpose
This installation guide contains procedures for installing line cards into the router, verifying the
installation, and creating a basic startup configuration file.
Document Organization
This installation and configuration guide is organized into the following chapters and appendixes:
•
•
•
Document Conventions
This publication uses the following conventions:
•
Command descriptions use these conventions:
Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide
-xii
Changes to This Document
Date
May 2010
December 2009
March 2009
Chapter 1, "Installing Line Cards in the Cisco ASR 9000 Series Router,"
installing the hardware and connecting external network interface cables.
Chapter 2, "Verifying and Troubleshooting the Line Card Installation,"
verifying the line card installation.
Appendix A, "Technical Specifications,"
environmental specifications for the router.
Ctrl represents the key labeled Control. For example, the key combination Ctrl-Z means hold down
the Control key while you press the Z key.
Change Summary
Information added about the new 16x10GE SFP+ line card and
SFP+ transceiver modules. Also added information about
additional versions of existing cards and new supported transceiver
modules.
Information added about the new 8x10GE 80 Gbps Line Rate Card
and 2x10GE + 20x1GE Combination Line Card.
Initial release of this document.
provides a summary of physical, electrical, and
provides instructions for
provides procedures for
OL-17500-08