Connecting And Communicating With The Router; Establishing A Connection Through The Console Port - Cisco ASR 9000 Getting Started Manual
Services router
Hide thumbs
Also See for ASR 9000:
- Command reference manual (1138 pages) ,
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages)
Table of Contents
Advertisement
Connecting and Communicating with the Router
•
•
•
Establishing a Connection Through the Console Port
To connect to the router through the console port, perform the following procedure.
SUMMARY STEPS
1.
2.
3.
4.
5.
DETAILED STEPS
Command or Action
Step 1
Identify the active .
Step 2
Connect a terminal to the Console port
of the active .
Cisco ASR 9000 Series Aggregation Services Router Getting Started Guide
38
Establishing a Connection Through the Console Port, page 47
Establishing a Connection Through a Terminal Server, page 48
Establishing a Connection Through the Management Ethernet Interface, page 50
Identify the active .
Connect a terminal to the Console port of the active .
Start the terminal emulation program.
Press Enter.
Log in to the router.
Purpose
Identifies the to which you must connect in the next step.
•
•
Establishes a communications path to the router.
•
•
•
•
This step is not required when the router hosts only one .
During the initial setup, you can communicate with the router only
through the console port of the active .
Router console port is designed for a serial cable connection to a
terminal or a computer that is running a terminal emulation program.
Terminal settings are:
Bits per second: 9600 (default value)
–
Data bits: 8
–
Parity: None
–
Stop bit:
–
Flow control: None
–
For information on the cable requirements for the console port, see the
hardware documentation listed in the
page
x.
Chapter
Configuring General Router Features
"Related Documents" section on
OL-28417-02
Hide quick links:
Advertisement
Chapters
Table of Contents
