Cisco ASR 903 Release Notes page 256
Hide thumbs
Also See for ASR 903:
- Installation manual (200 pages) ,
- Hardware installation manual (196 pages) ,
- Manual (147 pages)
Table of Contents
Advertisement
Caveats in Cisco IOS XE 3.10S Releases
Workaround: There is no workaround.
CSCud09813
•
Symptom: Timestamping does not work in CFM over cross-connected MEP with port channel.
Conditions: This issue is observed when you configure CFM over cross-connected MEP with port
channel from a Cisco ASR 903 router to a Cisco ME 3600 switch.
Workaround: There is no workaround.
CSCud12624
•
Symptom: Traceback is displayed when you configure the ACR group.
Conditions: This issue is observed when you configure an ACR group.
Workaround: There is no workaround.
CSCud29491
•
Symptom: A two-level policy with match EFP in parent and PHB-based policy in child can be
applied.
Conditions: This issue is observed when you apply a policy on a physical interface having EFPs on
that physical interface.
Workaround: There is no workaround. This configuration is not supported.
CSCud34630
•
Symptom: The following error message is displayed on the standby machine while using the
shutdown and no shutdown commands on the ACR controller:
NETWORK_RF_API-3-FAILDECODEDATADESC
Conditions: This issue is observed on the standby machine when you configure ACR interface.
Workaround: There is no workaround.
CSCud35689
•
Symptoms: The router accepts a queue-limit configuration at the parent level of a policy or at the
vlan class or port level.
Conditions: This issue is observed when you add a queue-limit configuration on a policy at the
parent level or at the vlan class or at port level.
Workaround: There is no workaround. This configuration is not supported.
CSCud35732
•
Symptom: The router does not apply egress CFM MIP filtering.
Conditions: This issue is observed when you overwrite a MIP configuration using the ethernet CFM
MIP level command.
Workaround: Instead of overwriting the MIP level configuration, remove and reapply the
configuration.
CSCud38038
•
Symptom: The router records incorrect delay measurements after a reload.
Conditions: This issue is observed under the following conditions:
–
–
–
Cisco IOS XE 3S Release Notes for the Cisco ASR 903 Router
14
You configure Delay Measurement Message (DMM) on a port-channel interface.
The port-channel member links are on different interface modules (IMs).
You reload the router.
Chapter
OL-26630-08
- Quick Links:
- Cisco Asr 903 Router Overview
Hide quick links:
Advertisement
Table of Contents
