Paper Loading; Fanfold Paper; Loading Of Fanfold Paper; Fig. 30 Insertion Of Fanfold Paper - Epson MX-82 Operation Manual

Epson printer user manual

Table of Contents

7. Paper Loading

The MX-82 F/T Printer accommodates fanfold paper from 4" to 10" in width. To

load the fanfold paper, observe the following procedure.

STEP 1. Raise the printer lid.

2. Unlock the release lever by pulling it in the direction of the arrow. (See Fig.

30)

3. Pull the scale toward the front of the Printer to detach the scale from the

platen.

4. Confirm that the paper guide roller is at the center of the sprocket shaft. If

not, set it at the center of the shaft.

NOTE: The paper guide roller contributes to smooth paper feeding.

5. Raise the two paper holding covers, and be sure to insert the fanfold paper

between the frame and plastic roller of the separator. (See Fig. 30)

Lever

6. Push the paper into the insertion slot between the paper guides at the rear

part of the printer mechanism.

NOTE: Be sure to pass the paper beneath the upper paper guide. Adjust

7. After the leading edge of the paper has emerged from the Printer, pull it out

gently to some length.

Scale

the position of the head adjusting lever in the forward (+) direction

when inserting thicker paper. (See Section 8, Gap Adjustment)

- 2 5 -

Frame

(Side view)

Table of Contents

Mx-82 f/t