Table of Contents
Advertisement
(2) Removal of protective paper for paper end detector
The MX-82 F/T is provided with a protective paper inserted between the inner
and outer paper guides to protect the
shocks or vibrations during transportation. Before using the Printer, be sure to
remove this paper. If the MX-82 F/T is to be reshipped, remember to return it to
the original position.
(3) Prepare tools
Prepare the following two screwdrivers to disassemble or assemble the printer.
(1) Phillips type screwdriver
(2) Round-blade type screwdriver
I
(4) Removal of shipping screws
The purpose of the shipping screws is to protect the MX-82 F/T against any da-
mage that may be caused by shocks or vibrations during transportation. There-
fore, before operating MX-82 F/T, remove the screws as described below. (See
Fig. 22)
STEP 1. Stand the printer on its left side.
2. Remove with a screwdriver, the two shipping screws visible on the un-
derside of the lower case.
NOTE: Save the two shipping screws for possible future use.
Fig. 21 Assembly Tools
Fig. 22 Removal of Shipping Screws
- 2 0 -
end detector from damage due to
paper
1
1
Advertisement
Table of Contents
