Brother KE-436C Instruction Manual page 41

Electronic lockstitch pattern tacker with stepping foot and programming function

Hide thumbs Also See for KE-436C:

Table of Contents

7. SEWING

Note:

When the power is turned on after once being turned off, the same pattern of sewing can be continued since the machine

will stores the sewing data from the last time.

5. Step on the work clamp switch (6) to raise the work

clamp.

6. Insert the work piece under the work clamp, and press

the work clamp switch (6) to lower the clamp.

7. Press the start switch (7).

Note:

The work clamp will return to the origin, and will then

advance to the sewing start position and blinking will

stop. This is only required the first time a program is

sewing.

8. Press the start switch (7) again to start sewing.

9. After sewing is completed, the thread cutter will

automatically operate, then the work clamp will rise.

2720Q

KE-436C

Table of Contents

Show Quick Links

Table of Contents