Dip Switch; Panel Dip Switch Functions - Brother KE-436C Instruction Manual
Electronic lockstitch pattern tacker with stepping foot and programming function
Hide thumbs
Also See for KE-436C:
- Parts manual (73 pages) ,
- Specifications (8 pages) ,
- Instruction manual (228 pages)
Table of Contents
Advertisement
10. DIP SWITCH
Note:
When changing DIP switch, the power must be off.
10-1. Panel DIP switch functions
DIP switch A
Switch
DIPA-1
DIPA-2
DIPA-3
DIPA-4
DIPA-5
DIPA-6
DIPA-7
DIPA-8
DIP switch B
Switch
DIPB-1
DIPB-2
DIPB-3
DIPB-4
DIPB-5
DIPB-6
DIPB-7
DIPB-8
Presser does not automatically lift after sewing
is completed.
Pedal mode is switched.
After sewing is completed, work clamp does not automatically rise. (only in split mode)
Clamping force output is produced. (Inner clamping device available as an option)
Thread breakage detector device is activated (available as an option).
Single split mode activated
Thread is not trimmed after an emergency stop.
Needle cooler output is produced. (Needle cooler available as an option)
When a rotating-type thread breakage detector device is used, detection precision is increased
from 8 to 14.
When a fiber-type thread breakage detector device is used, detection precision is increased
from 5 to 10.
Fiber-type thread breakage detector device is ON, and DIP switch A-8 is ON (available as an
option).
All DIP switches are set to OFF at the time of shipment.
Motion when set to ON
Motion when set to ON
KE-436C
10. DIP SWITCH
See "12. Setting the presser
mode"
1086Q
50
Hide quick links:
Advertisement
Table of Contents
