Table of Contents
Advertisement
Chapter 23
Configuring SNMP
Task
Step 9
Configure the community table for
the system default part, which
maps community strings of
previous versions of SNMP to
SNMPv3.
Step 10
Configure the community table for
mappings between different
community strings and security
models with full permissions.
Step 11
Verify the SNMP configuration.
This example shows how to set a MIB view name to interfacesMibView:
Console> (enable) set snmp view interfacesMibView 1.3.6.1.2.1.2 included
Snmp view name was set to interfacesMibView with subtree 1.3.6.1.2.1.2 included,
nonvolatile.
This example shows how to set the access rights for a group called guestgroup to SNMPv3 authentication
read mode:
Console> (enable) set snmp access guestgroup security-model v3 authentication read
interfacesMibView
Snmp access group was set to guestgroup version v3 level authentication,
readview interfacesMibView, context match:exact, nonvolatile.
This example shows how to specify the target addresses:
Console> (enable) set snmp notify notifytable1 tag routers trap
Snmp notify name was set to notifytable1 with tag routers notifyType trap, and storageType
nonvolatile.
These examples show how to set the snmpTargetAddrEntry in the target address table:
Console> (enable) set snmp targetaddr router_1 param p1 172.20.21.1
Snmp targetaddr name was set to router_1 with param p1
ipAddr 172.20.21.1, udpport 162, timeout 1500, retries 3, storageType nonvolatile.
Console> (enable) set snmp targetaddr router_2 param p2 172.20.30.1
Snmp targetaddr name was set to router_2 with param p2
ipAddr 172.20.30.1, udpport 162, timeout 1500, retries 3, storageType nonvolatile.
These examples show how to set SNMP target parameters:
Console> (enable) set snmp targetparams p1 user guestuser1 security-model v3
message-processing v3 authentication
Snmp target params was set to p1 v3 authentication, message-processing v3,
user guestuser1 nonvolatile.
Console> (enable) set snmp targetparams p2 user guestuser2 security-model v3
message-processing v3 privacy
Snmp target params was set to p2 v3 privacy, message-processing v3,
user guestuser2 nonvolatile.
These examples show how to configure guestuser1 and guestuser2 as users:
Console> (enable) set snmp user guestuser1 authentication md5 guestuser1password privacy
privacypasswd1
Snmp user was set to guestuser1 authProt md5 authPasswd guestuser1password privProt des
privPasswd
privacypasswd1 with engineid 00:00:00:09:00:10:7b:f2:82:00:00:00 nonvolatile.
78-12647-02
Software Configuration Guide—Catalyst 4000 Family, Catalyst 2948G, Catalyst 2980G, Releases 6.3 and 6.4
Command
set snmp community {access_type} [community_string]
(access_type = read-only | read-write | read-write-all)
set snmp community index {index_name} name
[community_string] security {security_name} context
{context_name} transporttag {tag_value} [volatile |
nonvolatile]
show snmp
Configuring SNMPv3 from the CLI
23-11
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Related Manuals for Cisco WS-C4003 - Catalyst 4000 Chassis Switch
Related Products for Cisco WS-C4003 - Catalyst 4000 Chassis Switch
- Cisco WS-C4503 - Syst. Catalyst 4503 3 Slot Chassis
- Cisco WS-C4506 - Syst. Catalyst 4500 Switch
- Cisco WS-C4506-E - Catalyst 4500 E-chassis
- Cisco WS-C4507R-E - Catalyst Switch
- Cisco WS-C4900M
- Cisco WS-C4948-10GE-E
- Cisco WS-C2960-24TC-S-RF - Catalyst Switch
- Cisco WS-C2980G-A - Catalyst 2980G-A 10/100 Switch