Table of Contents
Advertisement
Configuring GVRP
Join In Received:
Empty Received:
LeaveIn Received:
Leave Empty Received:
Leave All Received:
Join Empty Transmitted:
Join In Transmitted:
Empty Transmitted:
Leave In Transmitted:
Leave Empty Transmitted: 0
Leave All Transmitted:
VTP Message Received:
Console> (enable)
Clearing GVRP Statistics
To clear all GVRP statistics on the switch, perform this task in privileged mode:
Task
Clear GVRP statistics.
This example shows how to clear all GVRP statistics on the switch:
Console> (enable) clear gvrp statistics all
GVRP Statistics cleared for all ports.
Console> (enable)
Disabling GVRP on Individual 802.1Q Trunk Ports
To disable GVRP on individual 802.1Q trunk ports, perform this task in privileged mode:
Task
Step 1
Disable GVRP on an individual 802.1Q trunk
port.
Step 2
Verify the configuration.
This example shows how to disable GVRP on 802.1Q trunk port 1/1:
Console> (enable) set gvrp disable 1/1
GVRP disabled on 1/1.
Console> (enable)
Disabling GVRP Globally
To disable GVRP globally on the switch, perform this task in privileged mode:
Task
Disable GVRP on the switch.
Software Configuration Guide—Catalyst 4000 Family, Catalyst 2948G, Catalyst 2980G, Releases 6.3 and 6.4
13-8
0
0
0
0
40
156
0
0
0
41
0
Command
clear gvrp statistics {mod_num/port_num | all}
Command
set port gvrp disable mod_num/port_num
show gvrp configuration
Command
set gvrp disable
Chapter 13
Configuring GVRP
78-12647-02
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
