Table of Contents
Advertisement
Configuring the IP Permit List
Ssh permit list enabled.
Snmp permit list enabled.
Permit List
----------------
172.16.0.0
172.20.0.0
172.20.52.0
172.20.52.3
Denied IP Address Last Accessed Time Type
----------------- ------------------ ------
Denied IP Address
-----------------
172.100.101.104
172.187.206.222
Console> (enable) show snmp
RMON:
Extended RMON Netflow:
Traps Enabled:
ippermit
Port Traps Enabled: None
Community-Access
----------------
read-only
read-write
read-write-all
Trap-Rec-Address
----------------------------------------
Console> (enable)
Disabling the IP Permit List
To disable the IP permit list on the switch, perform this task in privileged mode:
Task
Step 1
Disable the IP permit list on the switch.
Step 2
Verify the IP permit list configuration.
This example shows how to disable the IP permit list:
Console> (enable) set ip permit disable
IP permit list disabled.
Console> (enable)
Clearing an IP Permit List Entry
An IP address can be cleared from the SNMP permit list, SSH permit list, the Telnet permit list, or all
lists. If you do not specify which permit list to clear the IP address from, the IP address is deleted from
both permit lists.
Software Configuration Guide—Catalyst 4000 Family, Catalyst 2948G, Catalyst 2980G, Releases 6.3 and 6.4
17-4
Mask
Access-Type
----------------
-------------
255.255.0.0
telnet
255.255.0.0
snmp
255.255.255.224
ssh
telnet ssh snmp
Last Accessed Time Type
------------------ ------
01/20/97,07:45:20
SNMP
01/21/97,14:23:05
Telnet
Disabled
Disabled
Community-String
--------------------
public
private
secret
Chapter 17
Telnet Count
SNMP Count
------------
----------
14
7
Trap-Rec-Community
--------------------
Command
set ip permit disable [ssh | snmp | telnet]
show ip permit
Configuring the IP Permit List
1430
236
78-12647-02
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
