Table of Contents
Advertisement
8.
Install the corotron.
(1) Install the corotron with protective cover, that was placed on the upper lid of the storage box,
on the marking module assembly, insert only the corotron, and push it in until the lock at the
front of the corotron clicks into place.
(2) Remove the corotron protective cover, and return it to the storage box.
9.
Load the IBT module.
(1) Raise the raise/lower handle of the IBT module.
(2) Set the raise/lower handle locking latch of the IBT module in place.
Set the latch so that it properly comes to the front of the raise/lower handle.
33
Advertisement
Table of Contents
