Table of Contents
Advertisement
3.
Rotate the handle of the transfer unit 2nd counterclockwise to unlock the unit. This sets the
transfer unit 2nd to a lowered state.
4.
Remove the IBT module cover.
When performing work with work objects placed on the floor, the floor
surface might get damaged or dirty. So, before starting work, lay paper,
vinyl sheet or similar material on the floor to protect its surface.
(1) Loosen the four screws on the IBT module cover, and lift the cover up to remove.
(Do not remove the screws.)
(2) After the IBT module cover is removed, place it flat on the floor to the right of the machine
with its top surface facing up.
15
Advertisement
Table of Contents
