Cisco Nexus 93180YC-FX3 Installation Manual page 47

Aci-mode switch

Hide thumbs Also See for Nexus 93180YC-FX3:

Table of Contents

Rack Specifications

•

Overview of Racks

You can install the switch in the following types of cabinets and racks, assuming an external ambient air

temperature range of 0 to 104°F (0 to 40°C):

• Standard perforated cabinets

• Solid-walled cabinets with a roof fan tray (bottom to top cooling)

• Standard open racks

Note

General Requirements for Cabinets and Racks

The cabinet or rack must also meet the following requirements:

• Standard 19-inch (48.3 cm) (two- or four-post EIA cabinet or rack, with mounting rails that conform to

Overview of Racks, on page 41

General Requirements for Cabinets and Racks, on page 41

Requirements Specific to Standard Open Racks, on page 42

Requirements Specific to Perforated Cabinets, on page 42

Cable Management Guidelines, on page 42

If you are selecting an enclosed cabinet, we recommend one of the thermally validated types, either standard

perforated or solid-walled with a fan tray.

We do not recommend that you use racks that have obstructions (such as power strips), because the obstructions

could impair access to field-replaceable units (FRUs).

English universal hole spacing per section 1 of ANSI/EIA-310-D-1992). For more information, see

Requirements Specific to Perforated Cabinets, on page

Cisco Nexus 93180YC-FX3 ACI-Mode Switch Hardware Installation Guide

A P P E N D I X

42.

Table of Contents

Chapters

Table of Contents

N9k-c93180yc-fx3