Cisco Nexus 93180YC-FX3 Installation Manual page 29

Aci-mode switch

Hide thumbs Also See for Nexus 93180YC-FX3:

Table of Contents

Installing the Switch Chassis

Align the two rear rack-mount bracket guides with

the slider rails installed in the rack.

Slide the rack-mount guides onto the slider rails until

the front rack-mount brackets come in contact with

the front rack-mount rails.

b) Align the two rear rack-mount guides on either side of the switch with the slider rails installed in the rack. Slide the

rack-mount guides onto the slider rails, and then gently slide the switch all the way into the rack until the front

rack-mount brackets come in contact with two rack or cabinet posts.

c) Holding the chassis level, insert two screws (12-24 or 10-32, depending on the rack type) in each of the two front

rack-mount brackets (using a total of four screws) and into the cage nuts or threaded holes in the vertical rack-mounting

rails (see the following figure).

Installing the Switch Using the N3K-C3064-ACC-KIT Rack-Mount Kit

Front-mount brackets.

Mounting rails on rack or cabinet posts.

Cisco Nexus 93180YC-FX3 ACI-Mode Switch Hardware Installation Guide

Table of Contents

Chapters

Table of Contents

N9k-c93180yc-fx3