Cisco Catalyst 9500 Manual page 104
Hide thumbs
Also See for Catalyst 9500:
- Manual (360 pages) ,
- Configuration manual (223 pages) ,
- Hardware installation manual (122 pages)
Table of Contents
Advertisement
Verifying Software Install
Step 2
show install log
Example:
Device# show install log
Displays information about all the software install operations that was performed since boot-up of the device.
Device# show install log
[0|install_op_boot]: START Sun Jun 11 15:01:37 Universal 2017
[0|install_op_boot]: END SUCCESS
[1|install_commit]: START Mon Jun 12 07:27:31 UTC 2017
[1|install_commit(INFO, )]: Releasing transaction lock...
[1|install_commit(CONSOLE, )]: Committing PACKAGE
[remote|install_commit]: START Mon Jun 12 07:28:08 UTC 2017
[remote|install_commit(INFO, )]: Releasing transaction lock...
[remote|install_commit]: END SUCCESS
[1|install_commit(INFO, )]: [1 2 3]: Performing Commit
SUCCESS: Commit finished
[1|install_commit(INFO, )]: install_commit: START Mon Jun 12 07:28:08 UTC 2017
SUCCESS: install_commit
[1|install_commit(INFO, )]: Remote output from switch 2
[1|install_commit(INFO, )]: install_commit: START Mon Jun 12 07:28:12 UTC 2017
SUCCESS: install_commit
[1|install_commit(INFO, )]: install_commit: START Mon Jun 12 07:28:12 UTC 2017
SUCCESS: install_commit
[1|install_commit]: END SUCCESS
Step 3
show install summary
Example:
Device# show install summary
Displays information about the image versions and their corresponding install state for all members/field-replaceable
unit (FRU).
• The output of this command differs based on the install command that is executed.
Device# show install summary
[ R0 ] Installed Package(s) Information:
State (St): I - Inactive, U - Activated & Uncommitted,
C - Activated & Committed, D - Deactivated & Uncommitted
--------------------------------------------------------------------------------
Type
St
Filename/Version
--------------------------------------------------------------------------------
IMG
I
16.6.2.0
IMG
C
16.6.1.0
Device#
Step 4
show install package filesystem: filename
Example:
Device# show install package flash:cat9k_iosxe.16.06.01.SPA.bin
Displays information about the specified software install package file.
System Management Configuration Guide, Cisco IOS XE Fuji 16.8.x (Catalyst 9500 Switches)
90
Sun Jun 11 15:01:44 Universal 2017
Mon Jun 12 07:28:41 UTC 2017
Mon Jun 12 07:28:41 UTC 2017
Mon Jun 12 07:28:44 UTC 2017
Mon Jun 12 07:28:45 UTC 2017
Mon Jun 12 07:28:47 UTC 2017
Performing Device Setup Configuration
Hide quick links:
Advertisement
Table of Contents
