What To Do Next - Cisco Catalyst 9500 Manual
Hide thumbs
Also See for Catalyst 9500:
- Manual (360 pages) ,
- Configuration manual (223 pages) ,
- Hardware installation manual (122 pages)
Table of Contents
Advertisement
What to Do Next
SUMMARY STEPS
1. enable
2. configure terminal
3. ip ftp username username
4. ip ftp password password
5. end
6. copy ftp: [[//location]/directory ]/bundle_name flash:
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Device> enable
Step 2
configure terminal
Example:
Device# configure terminal
Step 3
ip ftp username username
Example:
Device(config)# ip ftp username Admin01
Step 4
ip ftp password password
Example:
Device(config)# ip ftp password adminpassword
Step 5
end
Example:
Device(config)# end
Step 6
copy ftp: [[//location]/directory ]/bundle_name flash:
Example:
Device>copy ftp:/cat9k_iosxe.16.11.01.SPA.bin
flash:
What to Do Next
After you have issued the copy EXEC command, you may be prompted for additional information or for
confirmation of the action. The prompt displayed depends on how much information you provide in the copy
command and the current setting of the file prompt global configuration command.
System Management Configuration Guide, Cisco IOS XE Fuji 16.8.x (Catalyst 9500 Switches)
206
Purpose
Enables privileged EXEC mode.
• Enter your password if prompted.
(Optional) Enters global configuration mode. This step is
required only if you override the default remote username
or password (see Steps 3 and 4).
(Optional) Specifies the remote username.
(Optional) Specifies the remote password.
(Optional) Exits configuration mode. This step is required
only if you override the default remote username (see Steps
3 and 4).
Copies the configuration file from a network server to the
flash memory device using FTP.
Managing Configuration Files
Hide quick links:
Advertisement
Table of Contents
