Hardware Specifications - Cisco Firepower 2100 Series Hardware Installation Manual
Hide thumbs
Also See for Firepower 2100 Series:
- Getting started manual (104 pages) ,
- Hardware installation manual (92 pages) ,
- Manual (12 pages)
Table of Contents
Advertisement
Hardware Specifications
Hardware Specifications
The following table contains hardware specifications for the Firepower 2100 series security appliance.
Specification
Chassis dimensions
(H x W x D)
Network module
dimensions
Weight
System power
Temperature
NEBS
Humidity
Altitude
Sound pressure
Sound power
Cisco Firepower 2100 Series Hardware Installation Guide
30
2110
2120
1.73 x 16.90 x 19.76 in. (4.4 x 42.9 x 50.2 cm)
1.2 x 3.7 x 9.6 in. (4.39 x 9.4 x 24.38)
16.1 lb (7.3 kg)
100/240V AC 1.9 A (at 100 VAC), 50 to
60 Hz
The power supply module is
Note
rated at 4 A, but the system
power is limited to 1.9 A.
Operating: 32 to 104°F (0 to 40°C)
Nonoperating: -40 to 149°F (-40 to 65°C) maximum altitude is 40,000 ft
Operating altitude: 0 to 13,000 ft (3962 m)
Operating temperature:
• Long Term: 0 to 45°C up to 6000 ft (1829 m)
• Long Term: 0 to 35°C 6000-13000 ft (1829-3964 m)
• Short Term: -5 to 55°C up to 6000 ft (1829 m)
Firepower 2100 series NEBS compliance applies only to the 2130.
Note
Operating: 10 to 85 % noncondensing
Nonoperating: 5 to 95 % noncondensing
Operating: 10,000 ft maximum
Nonoperating: 40,000 ft maximum
47.3 dBA (typical)
73.4 dBA (maximum)
60.2 (typical)
85.1 (maximum)
2130
2140
19.4 lb (8.79 kg)
21 lb (9.52 kg)
100/240 V AC 2.9 A (at 100 VAC), 50 to
60 Hz
The power supply module is
Note
rated at 6.3 A, but the system
power is limited to 2.9 A.
55.7 dBA (typical)
76.7 dBA (maximum)
66 (typical)
84.5 (maximum)
Overview
Hide quick links:
Advertisement
Table of Contents
