hit counter script

Configure Alphanumeric Dialing; Call Park - Cisco 8800 Series Manual

Hide thumbs Also See for 8800 Series:
Table of Contents

Advertisement

Cisco IP Phone Configuration
Procedure
Step 1
Select Voice > User.
Step 2
In the Supplementary Services section, set Dial Assistance field to Yes.
You can also enable Dial Assisitance in the phone configuration file (cfg.xml).
<Dial_Assistance ua="rw">No</Dial_Assistance>
Step 3
Click Submit All Changes.

Configure Alphanumeric Dialing

You can configure a phone so that the user of the phone can make a call by dialing alphanumeric characters
instead of dialing only digits. In the phone web page, you can configure alphanumeric dialing with speed-dial,
blf, and call pickup.
Before you begin
Access the phone administration web page. See
Procedure
Step 1
Select Voice > Ext.
Step 2
In the Enable URI Dialing (n), select Yes to enable alphanumeric dialing.
You can also cofigure the parameter in the configuration file (cfg.xml). The parameter is line-specific.
<Enable_URI_Dialing_1_ ua="na">Yes</Enable_URI_Dialing_1_>
In the phone page, you can add a string on a line key in this format to enable speed dial with alphanumeric
dialing capability:
fnc=sd;ext=xxxx.yyyy@$PROXY;nme=yyyy,xxxx
For example:
fnc=sd;ext=first.last@$PROXY;nme=Last,First
The above example will enable the user to dial "first.last" to make a call.
Note
Step 3
Click Submit All Changes.

Call Park

With call park, a call can be parked and then retrieved either from your phone or from another phone. The
following LED colors display on the line key when this feature is configured:
The supported characters that you can use for alphanumeric dialing are a-z, A-Z, 0-9, -, _, ., and +.
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
Access the Phone Web Interface, on page
Configure Alphanumeric Dialing
104.
157

Advertisement

Table of Contents
loading

This manual is also suitable for:

885188618865

Table of Contents