Cisco 8800 Series Manual page 317
Hide thumbs
Also See for 8800 Series:
- Administration manual (406 pages) ,
- User manual (218 pages) ,
- Hardware installation manual (140 pages)
Table of Contents
Advertisement
Cisco IP Phone Configuration
Parameter
Server
Search Base
Client DN
Description
Enter a fully qualified domain name or IP address of an LDAP server.
Enter the host name of the LDAP server if the MD5 authentication method is used.
Perform one of the following:
• In the phone configuration file with XML(cfg.xml), enter a string in this format:
<LDAP_Server ua="na">ldapserver.com</LDAP_Server>
• In the phone web interface, enter IP address or host name of the LDAP server.
Default: Empty
Specify a starting point in the directory tree from which to search. Separate domain
components [dc] with a comma. For example:
dc=cv2bu,dc=com
Perform one of the following:
• In the phone configuration file with XML(cfg.xml), enter a string in this format:
<LDAP_Search_Base ua="na">dc=cv2bu,dc=com</LDAP_Search_Base>
• In the phone web interface, enter the search base.
Default: Empty
Enter the distinguished name domain components [dc]; for example:
dc=cv2bu,dc=com
If you are using the default Active Directory schema (Name(cn)->Users->Domain), an
example of the client DN follows:
cn="David Lee",dc=users,dc=cv2bu,dc=com
cn="David Lee",dc=cv2bu,dc=com
username@domain is the client DN format for a Windows server
For example, DavidLee@cv2bu.com
Perform one of the following:
• In the phone configuration file with XML(cfg.xml), enter a string in this format:
<LDAP_Client_DN ua="na">dc=cv2bu,dc=com</LDAP_Client_DN>
• In the phone web interface, enter the client domain name.
Default: Empty
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
Parameters for LDAP Directory
297
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
