Cisco 8800 Series Manual page 99
Hide thumbs
Also See for 8800 Series:
- Administration manual (406 pages) ,
- User manual (218 pages) ,
- Hardware installation manual (140 pages)
Table of Contents
Advertisement
Cisco IP Phone Provisioning
• Each opening element tag must have a matching closing element tag. For example:
<flat-profile>
<Resync_On_Reset> Yes
<Resync_Periodic> 7200
<Profile_Rule>tftp://prov.telco.com: 6900/cisco/config/CP_xxxx_MPP.cfg
</flat-profile>
• Element tags are case-sensitive.
• Empty element tags are allowed and will be interpreted as configuring the value to be empty. Enter the
opening element tag without a corresponding element tag, and insert a space and a forward slash before
the closing angle bracket (>). In this example, Profile Rule B is empty:
<Profile_Rule_B />
• An empty element tag can be used to prevent the overwriting of any user-supplied values during a resync
operation. In the following example, the user speed dial settings are unchanged:
<flat-profile>
<Speed_Dial_2_Name ua="rw"/>
<Speed_Dial_2_Number ua="rw"/>
<Speed_Dial_3_Name ua="rw"/>
<Speed_Dial_3_Number ua="rw"/>
<Speed_Dial_4_Name ua="rw"/>
<Speed_Dial_4_Number ua="rw"/>
<Speed_Dial_5_Name ua="rw"/>
<Speed_Dial_5_Number ua="rw"/>
<Speed_Dial_6_Name ua="rw"/>
<Speed_Dial_6_Number ua="rw"/>
<Speed_Dial_7_Name ua="rw"/>
<Speed_Dial_7_Number ua="rw"/>
<Speed_Dial_8_Name ua="rw"/>
<Speed_Dial_8_Number ua="rw"/>
<Speed_Dial_9_Name ua="rw"/>
<Speed_Dial_9_Number ua="rw"/>
</flat-profile>
• Use an empty value to set the corresponding parameter to an empty string. Enter an opening and closing
element without any value between them. In the following example, the GPP_A parameter is set to an
empty string.
<flat-profile>
<GPP_A>
• Element names may not include spaces or special characters. To derive the element name from the
administration web field name, substitute an underscore for every space or the special characters
,
,
, or
.
]
(
)
/
Example: The <Resync_On_Reset> element represents the Resync On Reset field.
• Each element name must be unique. In the administration web pages, the same fields can appear on
multiple web pages, such as the Line, User, and Extension pages. Append
to indicate the number that is shown in the page tab.
Example: The <Dial_Plan_1_> element represents the Dial Plan for Line 1.
</Resync_On_Reset>
</Resync_Periodic>
</Profile_Rule>
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
Element Tag Properties
,
[
to the element name
[n]
79
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
