Configure Speed Dial On A Programmable Softkey - Cisco 8800 Series Manual
Hide thumbs
Also See for 8800 Series:
- Administration manual (406 pages) ,
- User manual (218 pages) ,
- Hardware installation manual (140 pages)
Table of Contents
Advertisement
Configure Speed Dial on a Programmable Softkey
Before you begin
Access the phone administration web page. See
Procedure
Step 1
Select Voice > Phone.
Step 2
In the Programmable Softkeys section, set the Programmable Softkey Enable to Yes.
Step 3
Select a programmable softkey number field on which to configure a phone feature.
Step 4
Enter the string for the programmable soft key. See the different types of programmable softkeys described
in
Configure Speed Dial on a Programmable Softkey, on page
Step 5
Click Submit All Changes.
Configure Speed Dial on a Programmable Softkey
You can configure programmable softkeys as speed dials. The speed dials can be extensions or phone numbers.
You can also configure programmable softkeys with speed dials that perform an action that a vertical service
activation code (or a star [*] code) defines. For example, if you configure a programmable softkey with a
speed dial for *67, the call is placed on hold.
Before you begin
Access the phone administration web page. See
Procedure
Step 1
Select Voice > Phone.
Step 2
In the Programmable Softkeys section, set the Programmable Softkey Enable to Yes.
Step 3
To configure a speed dial PSK, enter the following in the PSK number field:
fnc=sd;ext=extensionname/starcode@$PROXY;vid=n;nme=name
Where:
• fnc= function of the key (speed dial)
• extensionname=extension being dialed or the star code action to perform
• vid= n is the extension that the speed dial will dial out
• name is the name of the speed dial being configured
Note
Step 4
Edit the following:
• Idle Key List: Edit the field as described in the following example:
Cisco IP Phone 8800 Series Multiplatform Phone Administration Guide for Release 11.3(1) and Later
264
The name field displays on the softkey on the IP phone screen. We recommend a maximum of 10
characters for a phone. If more characters are used, the label might be truncated on the phone screen.
Access the Phone Web Interface, on page
264.
Access the Phone Web Interface, on page
Cisco IP Phone Configuration
104.
104.
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
