Table of Contents
Advertisement
Configuring Enhanced Object Tracking
Monitoring Enhanced Object Tracking
9.
{
ip route prefix mask {ip-address |
interface-id [ip-address]} [distance] [name]
[permanent | track track-number] [tag tag]
10.
end
11.
show ip route track table
12.
copy running-config startup-config
For configuration examples, see this URL:
http://www.cisco.com/en/US/docs/ios/12_3/12_3x/12_3xe/feature/guide/dbackupx.html
Monitoring Enhanced Object Tracking
Use the following privileged EXEC or User EXEC commands ito display enhanced object tracking information.
Command
show ip route track table
show track [object-number]
show track brief
show track interface [brief]
show track ip [object-number] [brief] route
show track resolution
show track timers
For static routing networks only. Establish static routes.
Entering track track-number specifies that the static route is installed
only if the configured track object is up.
Return to privileged EXEC mode.
Display information about the IP route track table.
(Optional) Save your entries in the configuration file.
Purpose
Display information about the IP route track table.
Display information about the all tracking lists or the
specified list.
Display a single line of tracking information output.
Display information about tracked interface objects.
Display information about tracked IP-route objects.
Display the resolution of tracked parameters.
Display tracked polling interval timers.
985
- Quick Links:
- Configuration Overview
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
