Table of Contents
Advertisement
Configuring IPv6 Unicast Routing
Configuring IPv6
DETAILED STEPS
Command
1.
configure terminal
2.
ipv6 router rip name
3.
maximum-paths number-paths
4.
exit
5.
interface interface-id
6.
ipv6 rip name enable
7.
ipv6 rip name default-information {only |
originate}
8.
end
9.
show ipv6 rip [name] [interface
interface-id] [database] [next-hops]
or
show ipv6 route rip [updated]
10.
copy running-config startup-config
To disable a RIP routing process, use the no ipv6 router rip name global configuration command. To disable the RIP
routing process for an interface, use the no ipv6 rip name interface configuration command.
For more information about configuring RIP routing for IPv6, see the "Implementing RIP for IPv6" chapter in the
Implementation Guide, Cisco IOS Release
EXAMPLE
This example shows how to enable the RIP routing process cisco with a maximum of eight equal-cost routes and to
enable it on an interface:
Switch(config)# ipv6 router rip cisco
Switch(config-router)# maximum-paths 8
Switch(config)# exit
Switch(config)# interface gigabitethernet0/3
Purpose
Enter global configuration mode.
Configure an IPv6 RIP routing process, and enter router
configuration mode for the process.
(Optional) Define the maximum number of equal-cost
routes that IPv6 RIP can support. The range is from 1 to
64, and the default is 4 routes.
Return to global configuration mode.
Enter interface configuration mode, and specify the
Layer 3 interface to configure.
Enable the specified IPv6 RIP routing process on the
interface.
(Optional) Originate the IPv6 default route (::/0) into the
RIP routing process updates sent from the specified
interface.
Note:
To avoid routing loops after the IPv6 default route
(::/0) is originated from any interface, the routing
process ignores all default routes received on any
interface.
only—Select to originate the default route, but
suppress all other routes in the updates sent on this
interface.
originate—Select to originate the default route in
addition to all other routes in the updates sent on
this interface.
Return to privileged EXEC mode.
Display information about current IPv6 RIP processes.
Display the current contents of the IPv6 routing table.
(Optional) Save your entries in the configuration file.
15.2M&T.
947
IPv6
- Quick Links:
- Configuration Overview
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
