Table of Contents
Advertisement
Working with the Cisco IOS File System, Configuration Files, and Software Images
Working with the Flash File System
-
-
-
Switch#
Detecting an Unsupported SD Flash Memory Card
When the switch starts and detects an unsupported Secure Digital (SD) flash memory card, or when you insert an
unsupported SD flash memory card while the switch is running, the following warning message is displayed:
WARNING: Non-IT SD flash detected. Use of this card during normal
operation can impact and severely degrade performance of the system.
Please use supported SD flash cards only.
To display information about the SD flash memory card on the screen, use the show platform sdflash privileged EXEC
command.
This example shows an unsupported SD flash memory card:
Switch# show platform sdflash
SD Flash Manufacturer
Size
Serial number
Revision
Manufacturing date: 12/2009
This example shows a supported SD flash memory card:
Switch# show platform sdflash
SD Flash Manufacturer
Size
Serial number
Revision
Manufacturing date: 3/2010
Note:
When you enter the show platform sdflash privileged EXEC command, the name, date, and other fields that are
displayed depend on the manufacturer of the SD flash memory card. However, if the SD flash memory card is
unsupported, "Non IT" is displayed after the manufacturer's name.
Note:
The output of the show platform sdflash privileged EXEC command is also included in the show tech-support
privileged EXEC command output.
-
network
rw
scp:
-
network
rw
https:
-
opaque
ro
cns:
: SMART MODULAR (ID=27h) - Non IT
: 485MB
: B01000A5
: 2.0
: SMART MODULAR (ID=27h)
: 972MB
: 07000019
: 2.0
994
- Quick Links:
- Configuration Overview
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
