Show Class-Map - Cisco Catalyst 3550 Command Reference Manual
Multilayer switch
Hide thumbs
Also See for Catalyst 3550:
- Command reference manual (794 pages) ,
- Installation manual (154 pages) ,
- Hardware installation manual (106 pages)
Table of Contents
Advertisement
Chapter 2 Cisco IOS Commands
show class-map
Use the show class-map user EXEC command to display quality of service (QoS) class maps, which
define the match criteria to classify traffic.
Syntax Description
class-map-name
| begin
| exclude
| include
expression
Command Modes
User EXEC
Command History
Release
12.1(4)EA1
Usage Guidelines
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show class-map command:
Switch> show class-map
Class Map match-any dscp_class
Match ip dscp 9
Class Map match-all vlan_class
Match vlan 10 20-30 40
Match class-map dscp_class
Related Commands
Command
class-map
match (class-map configuration)
78-11195-09
show class-map [class-map-name] [ | {begin | exclude | include} expression]
(Optional) Display the contents of the specified class map.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was first introduced.
Description
Creates a class map to be used for matching packets to the class
whose name you specify.
Defines the match criteria to classify traffic.
Catalyst 3550 Multilayer Switch Command Reference
show class-map
2-233
Advertisement
Table of Contents
