Link State Track - Cisco Catalyst 3560-X Command Reference Manual
Hide thumbs
Also See for Catalyst 3560-X:
- Software configuration manual (1538 pages) ,
- Command reference manual (1244 pages) ,
- Manual (276 pages)
Table of Contents
Advertisement
Chapter 2
Catalyst 3750-X and 3560-X Switch Cisco IOS Commands
link state track
Syntax Description
Defaults
Command Modes
Command History
Usage Guidelines
Examples
Related Commands
OL-21522-02
Downloaded from
www.Manualslib.com
Use the link state track user EXEC command to enable a link-state group. Use the no form of this
command to disable a link-state group.
link state track [number]
no link state track [number]
number
Link-state tracking is disabled for all groups.
Global configuration
Release
12.2(53)SE2
Use the link state track global configuration command to enable a link-state group.
This example shows how enable link-state group 2:
Switch(config)# link state track 2
You can verify your settings by entering the show running-config privileged EXEC command.
Command
link state group
show mac access-group
show running-config
manuals search engine
(Optional) Specify the link-state group number. For a Catalyst 3750-X
switch, the group number can be 1 to 10. For a Catalyst 3560-X switch,
the group number can be from 1 to 2. The default is 1.
Modification
This command was introduced.
Description
Configures an interface as a member of a link-state group.
Displays the link-state group information.
Displays the operating configuration. For syntax information, use this
link to the Cisco IOS Release 12.2 Command Reference listing page:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/prod_comm
and_reference_list.html
Select the Cisco IOS Commands Master List, Release 12.2 to navigate
to the command.
Catalyst 3750-X and 3560-X Switch Command Reference
link state track
2-325
Advertisement
Table of Contents
