Table of Contents
Advertisement
Configuring Line (FXO) Ports, Phone (FXS) Ports, and IP Telephone (SIP/BRI) Services
Trunks Summary
Trunks Summary
TIP
Unified Communications UC 320W Administration Guide
•
SRV Record Lookup: Check this box to use DNS SRV lookup for Proxy and
Outbound Proxy, or leave this box unchecked to disable SRV lookup.
•
SRV Auto Prefix: Check this box to automatically prepend the Proxy or
Outbound Proxy name with _sip._udp when performing a DNS SRV lookup
on that name. Uncheck the box not to use this service.
•
Local SIP Port: Displays the local port number to be used for this service.
Mediatrix Gateway Settings:
To enter the settings, click Settings. To hide the settings, click the button again.
•
Description: Enter a short description of this service for your reference.
•
Mediatrix IP: Enter the IP address for the Mediatrix server.
•
Call Capacity: Enter the number of simultaneous calls that are supported
on this trunk.
•
Prefix dialed numbers with (code): Check the box if this feature is required
by the SIP provider. When this feature is enabled, the system automatically
inserts the appropriate dialing prefix to an external number (such as 1+ in
the US or 44+ in the UK, based on the specified Regional Settings).
•
Local SIP Port: Displays the local port number to be used for this service.
Use the Trunks Summary page to view a summary of the settings from each page
of this module. To change the settings on a page, click the hyperlink for the page.
Opening this page: This page appears only when you are creating a new
configuration. From the navigation pane, choose Trunks > Summary.
During the initial configuration, the system automatically saves your settings after
you click Next. To load a saved session, click the Restore / Load Session link near
the top of the page. Then choose Resume incomplete session from device, and
click Restore / Load.
6
70
Advertisement
Table of Contents
