Cisco UC 320W Administration Manual page 8

Small business unified communications

Table of Contents

Installing the Unified Communications System

Getting to Know the Cisco UC 320W

Unified Communications UC 320W Administration Guide

POWER/SYS On - Normal operation. Slow flashing - Booting up. Fast

flashing - Upgrading firmware. Off - No power.

LAN On - Connected to a device. Flashing - Sending or receiving data.

Off- Not connected.

WAN On - Connected to WAN. Flashing - Sending or receiving data. Off-

Not connected.

PHONE (FXS) On - Service is available on the port, and the port is not in

use. Slow Flashing - Service is available and the attached phone is off

hook (in use). Off - The port is disabled.

LINE (FXO) On - PSTN line loop detected. Slow Flashing - FXO port is

off hook (i.e, the port is in use). Off - Not connected.

WLAN On - Wireless radio is on. Flashing - Sending or receiving data.

Off - Disabled.

VM On - Voice mail is enabled. Fast Flashing - System is full. Slow

flashing - Retrieving or recording voice mail. Off - Disabled.

USB For future use.

WPS On - WiFi Protected Setup succeeded. Slow flashing - Setup is in

progress. Fast flashing - Setup error. Off - Not in use.

Back Panel

LINE (FXO) Connect phone lines for traditional telephone service.

PHONE (FXS) Connect an analog phone or fax machine.

WAN Connect to the broadband network access device or to an uplink

port on an Ethernet switch that is connected to the Internet.

LAN Connect IP phones and other network devices.

LINE OUT Connect to an external speaker system.

LINE IN Connect to an external music source for music on hold service

(optional).

Power Connect to a power source. Use only the provided power

adapter.

Table of Contents