Show Vlan Access-Map - Cisco Nexus 7000 Series Command Reference Manual
Hide thumbs
Also See for Nexus 7000 Series:
- Reference manual (746 pages) ,
- Configuration manual (536 pages) ,
- Hardware installation and reference manual (508 pages)
Table of Contents
Advertisement
Show Commands
show vlan access-map
To display all VLAN access maps or a VLAN access map, use the show vlan access-map command.
show vlan access-map map-name
Syntax Description
map-name
Command Default
None
Command Modes
Any command mode
Command History
Release
4.2(1)
4.0(1)
Usage Guidelines
The device shows all VLAN access maps, unless you use the map-name argument to specify an access map.
If you do not specify an access-map name, the device lists VLAN access maps alphabetically by access-map
name.
For each VLAN access map displayed, the device shows the access-map name, the ACL specified by the
match command, and the action specified by the action command.
Use the show vlan filter command to see which VLANs have a VLAN access map applied to them.
This command does not require a license.
Examples
This example shows how to remove dynamically learned, secure MAC addresses from the Ethernet 2/1
interface:
switch# show vlan access-map
Vlan access-map austin-vlan-map
Modification
Command output is sorted alphabetically by the ACL names.
This command was introduced.
match ip: austin-corp-acl
action: forward
VLAN access map, which can be up to 64
alphanumeric, case-sensitive characters.
Cisco Nexus 7000 Series Security Command Reference
show vlan access-map
933
Advertisement
Table of Contents
