Installing Antennas - Cisco IR829 Hardware Installation Manual

Industrial integrated services router

Hide thumbs Also See for IR829:

Table of Contents

Installing the Router

Figure 1

Accessing the SIM Cards

Figure 2

Sim Card Detail

Replace the panel and the screws.

Installing Antennas

NOTE: Before you install the Cisco IR829 Integrated Services Router on a table, wall, or DIN rail, install the antennas on the front panel.

It is difficult to install the antennas after the router is installed.

There are two TNC connectors on the front side of the chassis. There are four TNC and one SMA connectors on the back side of the chassis.

Two TNC connectors are used to connect to the 4G modem. The four TNC connectors at the back will be connected to the two 4G modems.

The front two TNC connectors will be used for WiFi.

Orient the antennas. For optimum wireless performance, the antennas should be perpendicular with respect to the floor.

If the router is being mounted on a desk, orient the antennas straight up.

To attach the radio antennas to your wireless router, follow these steps:

Manually screw the antenna tight to the TNC connectors on the back of the router.

Orient the antennas. For optimum wireless performance, antennas should be generally perpendicular to each other.

Reset Button

Mini USB Port

Dual Sim Slots

Table of Contents

Show Quick Links

Table of Contents