hit counter script

Installing Antennas - Cisco 807 Hardware Installation Manual

Industrial integrated services router
Table of Contents

Advertisement

5.
If SIM card is present, then push the SIM card to eject it out of the slot. Install the new SIM card by pushing it into
the slot until you hear a clicking sound.
6.
Replace the protective cover and the screws.
Modems
The Cisco IR807 uses the WP7502, WP7504, and WP7601 series modems:
Product
IR807-LTE-GA-K9 EMEA
IR807-LTE-NA-K9 North
IR807-LTE-VZ-K9

Installing Antennas

There are two TNC connectors on the device. The TNC connectors are used to connect to the 4G modem. The SMA
connector is for the GPS antenna.
Orient the antennas. For optimum wireless performance, the antennas should be perpendicular with respect to the floor.
If the router is being mounted on a desk, orient the antennas straight up.
To attach the radio antennas to your wireless router, follow these steps:
1.
Manually screw the antenna tight to the TNC connectors on the front of the router.
2.
Orient the antennas. For optimum wireless performance, antennas should be generally perpendicular to each other.
Dual Antennas
In all cases, an antenna must be connected to the main port. It is highly recommended in order to achieve optimal
performance that a second antenna is connected to the diversity port:
Sierra Wireless WP7xxx modem series supports SIMO on LTE. WCDMA UMTS HSPA DC-HSPA+ is diversity only,
without SIMO.
Carrier/Region
Modem
Used
WP7502
WP7504
America/AT&T
Verizon, USA
WP7601
4G/LTE Bands
3G UMTS
Supported
Bands
Supported
1, 3, 7, 8, 20
1, 8
2, 4, 5, 12, 17,
2, 4, 5
25, 26
4, 13
N/A
30
2G
GSM/CDMA
Bands
supported
E-GSM 900
DCS 1800
CDMA
BC0,
BC1
BC1-
N/A

Advertisement

Table of Contents
loading

Table of Contents