Table of Contents
Advertisement
Modems
Note: The IR807G-LTE-GA-K9 and IR807G-LTE-NA-K9 will have 2 SIM slots. The IR807G-LTE-VZ-K9
has only 1 slot.
1. If SIM card is present, then push the SIM card to eject it out of the slot. Install the new SIM card by
pushing it into the slot until you hear a clicking sound.
2. Replace the protective cover and the screws.
Modems
The Cisco IR807 uses the WP7502, WP7504, and WP7601 series modems:
Product
IR807-LTE-GA-K9
IR807-LTE-NA-K9
IR807-LTE-VZ-K9
Installing Antennas
There are two TNC connectors on the device. The TNC connectors are used to connect to the 4G modem.
The SMA connector is for the GPS antenna.
Orient the antennas. For optimum wireless performance, the antennas should be perpendicular with respect
to the floor.
If the router is being mounted on a desk, orient the antennas straight up.
To attach the radio antennas to your wireless router, follow these steps:
1. Manually screw the antenna tight to the TNC connectors on the front of the router.
2. Orient the antennas. For optimum wireless performance, antennas should be generally perpendicular to
each other.
Dual Antennas
In all cases, an antenna must be connected to the main port. It is highly recommended in order to achieve
optimal performance that a second antenna is connected to the diversity port:
Cisco IR807 Industrial Integrated Services Router Hardware Installation Guide
28
Carrier/Region
Modem
Used
EMEA
WP7502
North
WP7504
America/AT&T
Verizon, USA
WP7601
4G/LTE Bands
3G UMTS
Supported
Bands
Supported
1, 3, 7, 8, 20
1, 8
2, 4, 5, 12, 17, 25,
2, 4, 5
26
4, 13
N/A
Installing the Router
2G GSM/CDMA
Bands supported
E-GSM 900DCS
1800
CDMA
BC0,BC1BC1-
N/A
Advertisement
Table of Contents
